Omari Gates
Australian phone numbers can be quite confusing, with many rules and variations depending on the type of number and whether you're calling from within Australia or internationally. So, how many digits are in an Australian phone number?
| Characteristics | Values |
|---|---|
| Landline numbers | 2 digits for the area code followed by 8 digits for the rest of the telephone number |
| Mobile numbers | 10 digits with no area code |
| International dialling code | +61 |
| Dial-out code | 0011 |
| Maximum size of Australian telephone number | 10 digits |
| Previous maximum size of Australian telephone number | 6 digits |
| ITERRA satellite phone code | 01471 |
| Optus network number | 0145 |
Explore related products
What You'll Learn
Landline numbers
Australia's landline numbers are quite standardised and straightforward. They consist of a country code, an area code, and a local number. The country code, +61, directs the call to Australia. The area code, which is usually a single digit, routes the call to the correct region. The local number, which is typically eight digits, identifies the specific recipient within that region.
When writing a landline number in Australia, the area code is followed by a non-breaking space and then the rest of the number in two chunks of four digits. For example, a landline number in Sydney, New South Wales, might look like (02) 1234 5678, with '02' as the area code and '1234 5678' as the local number. The area code '2' indicates the geographical region of New South Wales and the Australian Capital Territory.
When dialling a landline number, if the caller's phone shares the same area code as the number being called, the area code may be omitted. For example, if someone in Sydney dials a number in Melbourne (area code 03), they would simply dial the local number, 7010 5678, to be connected to 03 7010 5678. For this reason, landline numbers are often specified without the area code.
To dial an Australian landline number from overseas, start with the international access code (e.g. 011 in the USA or 00 in Europe), followed by Australia's country code (+61). Then, omit the leading zero from the area code and dial the rest of the number. For example, to dial the Sydney number from the previous paragraph, you would dial 011 61 2 1234 5678 from the USA or 00 61 2 1234 5678 from Europe.
International Waters: Australia's Limitless Freedom
You may want to see also
Explore related products
Mobile numbers
The country code for Australia is +61, and the international access code varies depending on the country from which you are calling (for example, 011 in the USA or 00 in Europe). When calling an Australian mobile number from outside Australia, you would combine these components correctly by adding the international access code, the Australian country code, and then dialling the area code followed by the local number. For example, to call (02) 1234 5678 from the USA, you would dial 011 61 2 1234 5678.
The Australian phone number system has evolved over time and is likely to continue to do so, adapting to technological advancements and increasing demand. The use of a leading zero is common in many countries and indicates a different telephone exchange. For example, when dialling interstate within Australia, you would add 02 to reach the NSW telephone exchange.
Eastbay Shoe Shipping: Does Australia Get Delivery?
You may want to see also
Explore related products
International calls
When making an international call to Australia, it is important to follow the correct international call format. This will ensure that your call is routed correctly to the Australian phone network.
Firstly, you need to dial your country's international exit code. For example, the exit code for the United States is 011, while for the United Kingdom, it is 00.
Next, you need to dial Australia's country code. The country code for Australia is +61. This code is used when dialling an Australian number from outside the country.
After that, you need to dial the Australian area code. Australian area codes usually begin with a '0' followed by a single digit, such as 02 for New South Wales, 03 for Victoria, or 07 for Brisbane. For international calling, you drop the '0' from the area code and input the Australian country code '+'61' before it.
Finally, you need to dial the local number. Australian local numbers usually consist of eight digits. Mobile numbers in Australia typically begin with '04' or '05' followed by eight digits.
+61 2 1234 5678
+61 4XX XXX XXX
It is important to note that the format for international calls may vary slightly depending on the country you are calling from. Always check the specific international call format for your country before placing the call.
Applying to Subway Australia: A Step-by-Step Guide
You may want to see also
Explore related products
National trunk access code
Australia's National Trunk Access Code is ''0'. This is the code used to route calls within the country.
The Australian trunk code is used when making a domestic call to a number in a different area code. For example, if you are calling a number in the area code '2', and you are in the area code '3', you would dial the trunk code ''0' followed by the area code '2' and then the local number.
The country code for Australia is '61'. This is used when making an international call to Australia. For example, a caller from the UK would dial '00 61' followed by the area code and local number. The ''+' symbol is often used on digital devices to automatically dial the international call prefix.
When dialling an Australian mobile number from within Australia, the trunk code '0' is used, followed by the mobile indicator '4' or '5', and then the eight-digit phone number. From outside Australia, the international call prefix of the originating country is used, followed by Australia's country code '61', the mobile indicator, and the eight-digit phone number.
Australian landline numbers have a two-digit area code followed by an eight-digit phone number, making a total of ten digits. Mobile numbers also follow this ten-digit format, but the mobile indicator '4' or '5' is included instead of an area code.
King Parrots: Australia's Native Gem, Found in Nature's Lap
You may want to see also
Explore related products
Country code
To call Australia from another country, you must first dial the IDD (International Direct Dialing) code, then Australia's country code, followed by the Australian phone number. The IDD code varies depending on the country you are calling from. For example, the IDD code for voice calls from Australia is 0011.
Australian landline numbers have a two-digit area code followed by an eight-digit local number. Mobile numbers in Australia use ten digits, with no area code. The first two digits of a mobile number are typically 04, followed by the subscriber's six-digit number.
When writing Australian telephone numbers, it is recommended to break the numbers into shorter blocks of digits or "chunks" to improve readability. For landline numbers, the area code should be followed by a non-breaking space, and the rest of the number should be written in two chunks of four digits. Mobile numbers should be written in one chunk of four digits and then two chunks of three digits.
Australia to Krakatoa: How Far is Too Far?
You may want to see also
Frequently asked questions
Australian phone numbers typically consist of 9 to 10 digits, including the area code and local number. Landlines have 2 digits for the area code and 8 digits for the rest of the number. Mobile numbers have 10 digits, with no area code.
When calling an Australian number from outside the country, use the country code '+61' followed by the area code and local number.
When calling an Australian mobile number from within Australia, use the 10-digit number starting with '04'.
