Damon Mcknight
There are many ways to fold a map, and while there is no wrong way, some methods will allow for faster access to different sections of the map. One common method is to fold the map in half crosswise, with the West side on top of the East side, and then fold each side into the centre crease. The map can then be folded in thirds, crosswise, to save space. Alternatively, you can fold the map into 16 quadrants by first folding it in half lengthwise and then crosswise, and then folding each side to the centre crease. Knowing how to fold a map efficiently will make it easier to carry and access, especially if you are planning a trip to Australia and need to carry a large map.
| Characteristics | Values |
|---|---|
| Map placement | Face-up on a large, flat surface |
| Map orientation | West side on left, East side on right |
| First fold | Map folded in half crosswise |
| Second fold | One outer edge folded inward to touch the center crease |
| Third fold | Fold the section back toward you, lining up the edges |
| Map position | Face-down |
| Fourth fold | Folded outer edge brought back to the middle crease |
| Fifth fold | Map folded in thirds, crosswise |
Explore related products
What You'll Learn
Lay the map flat
To lay your map flat, you will first need to unfold it and place it on a flat surface. This surface should be large enough to support the entire map without the edges hanging off. If the map is hanging off the edges, it will be more difficult to fold evenly. The surface should also be at a comfortable height so you can reach all four corners without straining.
Once you have found a suitable surface, lay the map face-up. If your map has creases from previous folds, ensure that you have refolded the map until you have two equal sections that are clearly divided by a sharp crease. You should now have a single, sharp crease down the middle of the map.
If your map has a clear front panel, position the map so that the name is located in both the top right and bottom left corners. This will ensure that the name of the map is facing up when it is closed. This way, if you have multiple maps, you can easily identify them without opening them.
Finding Australian Businesses: Phone Lookup
You may want to see also
Explore related products
Fold in half crosswise
Folding a map is a great way to save space and make it more convenient to carry. It is also a useful way to quickly access different sections of the map. Here is a step-by-step guide to folding a map in half crosswise:
Firstly, lay the map face-up on a flat surface. Ensure that the surface is large enough to accommodate the entire map. This initial step is important as it provides a foundation for the rest of the folding process. The map should be oriented so that the West side is on your left and the East side is on your right. This will ensure that when you fold the map in half, the West side will be on top, allowing for easier navigation.
Next, take the West side of the map and carefully fold it over, directly on top of the East side. It is important to line up the edges of the map precisely to create a neat fold. Once the edges are aligned, press down firmly to create a sharp crease. This can be enhanced by using a ruler or a roller, which will result in a crisper crease.
Now, unfold the map and lay it out flat again. Examine the crease you just made. If it is not sharp enough or is not centred, re-fold the map, focusing on creating a distinct and centred crease. The goal is to have two equal sections of the map clearly divided by a crisp crease down the middle.
Once you have achieved a satisfactory centre crease, you will fold one of the outer edges inward, towards the centre crease. This fold should be in the same direction as the previous one (crosswise). Line up the edge of the map with the centre crease and then press down to create a new crease.
Finally, grab the outer edge of the section you just folded and fold it backward toward yourself. Again, pay attention to lining up the edges neatly. Once aligned, fold it down and create a sharp crease. This fold should be half the width of the previous fold.
By following these steps, you will have successfully folded a map in half crosswise. This technique can be applied to maps of various sizes, including large maps that may be challenging to handle and carry.
Finding Debt in Australia: A Guide to Locating Your Debts
You may want to see also
Explore related products
![National Geographic Continents of the World Maps (folded with flags and facts) [Map Pack Bundle] (National Geographic Reference Map)](https://m.media-amazon.com/images/I/71+PctOrZfL._AC_UY218_.jpg)
Fold in the same direction
To begin, unfold your map and lay it out flat on a surface that is large enough to accommodate the entire map. Ensure that the map is oriented with the West side on your left and the East side on your right. Now, you're ready to start folding in the same direction.
For the first fold, grab one of the outer edges of the map and fold it inward towards the centre. Make sure you are folding in the same direction as your initial crosswise fold, which is critical to ensuring your map folds neatly and uniformly. Line up the edge of the map with the centre crease and then press down to create a sharp crease.
Next, grab the outer edge of the section you just folded and fold it back towards you. Line up the edges carefully and then fold it down to create another sharp crease. This fold should be half the width of your previous fold.
Now, flip the map face down, being careful not to unfold your previous creases. Take the folded outer edge and bring it back towards the centre crease. By folding in the same direction, you are creating a uniform and compact fold that will allow your map to fit into small spaces, such as your pocket or backpack.
If your map is still too large, you can continue folding in the same direction, making each fold half the width of the previous one. This will result in a series of accordion-style folds that will significantly reduce the size of your map. Once you are satisfied with the size, you can finish by folding the map in thirds crosswise, ensuring that the front panel, if your map has one, ends up on top.
Subway's Free Refill Policy: What Australians Need to Know
You may want to see also
Explore related products
Line up edges
To make an Australian fold map, start by laying the map face-up on a flat surface. Make sure the surface is large enough to fit the entire map, as having the edges hang off will make it more difficult to fold evenly. Position the map so that the map's name is in both the top right and bottom left corners. This way, the name of the map will be facing up when it's closed, allowing for easy identification.
Now, fold the map in half crosswise. To do this, place the West side on your left and the East side on your right, then fold the West side over the East side. Carefully line up the edges of the map and press down to create a sharp crease down the middle.
Next, fold one of the outer edges inward to touch the center crease. Continue folding in the same direction (crosswise), lining up the edge of the map with the center crease. Once the edges are aligned, press down to create a new crease.
Grab the outer edge of the section you just folded and fold it back toward you, lining up the edges again. Once properly aligned, fold it down and make another sharp crease. This fold should be half the width of the previous one.
Flip the map face-down, ensuring that the folds you've made remain intact. Bring the folded outer edge back to the middle crease.
By following these steps, you will have successfully created an Australian fold, allowing for convenient storage and accessibility of your map.
Car Insurance Costs in Australia: What to Expect
You may want to see also
Explore related products
Flip the map
To fold an Australian map, or any map for that matter, you will need to start by laying it out on a flat surface, face-up. Make sure the surface is large enough to support the entire map, so that the edges are not hanging off the sides.
Now, flip the map face-down. Bring the folded outer edge to the middle crease, without unfolding the folds you just made.
Repeat the previous steps for the second half of the map. Once you are done, the map will have 8 equal, vertical panels.
Finally, fold the map in thirds, crosswise, to save space. If your map has a front panel, use that as a guide for your first fold. The second fold should be the same size as the first.
Account Names: Money Transfer Accuracy in Australia
You may want to see also
Frequently asked questions
Lay the map face-up on a flat surface. Ensure the surface is large enough to support the entire map.
Fold the map in half crosswise. Position the West side of the map on your left and the East side on your right. Take the West side and fold it over the East side.
Fold one of the outer edges inward to touch the center crease. Repeat on the other side.
First, fold the map in half lengthwise, then fold it in half crosswise. Next, pull up the bottom edge to the middle crease and crease again. Repeat with the top edge.
Geoscience Australia offers free downloadable digital maps of the country. These maps can be printed on large-format paper.
