Leslie Massey
Making a doona cover in Australia is a simple process that involves cutting and sewing fabric. The first step is to cut the fabric with a straight cut, leaving a seam allowance, and then measuring and adding extra length for the overlap of the button band. After cutting the fabric, the next step is to pin the edges together, leaving openings at the top and bottom. This process is repeated for the back section of the doona cover. Once the cutting and pinning are complete, it's time to sew the pieces together. Sewing can be done by hand or with a sewing machine, using a straight stitch and a straight edge to attach the patches. Finally, the raw edges can be enclosed using a French seam, and the doona cover can be decorated as desired.
| Characteristics | Values |
|---|---|
| Materials | Soft cotton or cotton blend, flannel, or patchwork |
| Tools | Sewing machine, needle, thread, scissors, iron, snaps, zipper foot, buttons, safety pins |
| Steps | Cut the sheet with a straight-cut, leaving a 6-inch seam allowance; measure and add 2 inches for the button band overlap; pin the edges together, leaving 1 inch open at the top and bottom; repeat for the back section; sew patches one by one using a straight stitch; attach the pieces with a needle and thread; assemble the duvet cover by sewing the front and back pieces together; iron the fabric; place strips of fabric in the center and pin them together; sew the two pieces together by overlapping them; sew the tape down using a zipper foot; sew the edges of the front and back pieces; fold in half and use a French seam to enclose the raw edges; turn the duvet cover and iron it |
| Techniques for Putting on a Doona Cover | The 'rolling method', the 'take the corners and flip' technique, the 'burrito method', the 'crab crawl' method |
Explore related products
What You'll Learn
Cutting the sheets
The first step in making a doona cover is to cut the sheets. Use a straight-cut, leaving a 6-inch seam allowance. It is important to measure and add 2 inches to allow for the overlap of the button band. The centre panel should be cut at 91 inches long, and two panels should be cut at 17 inches wide. Cut the straight side panels by folding the selvage edge towards the centre, and then cut the fabric along the folded edge.
After cutting the panels, you can assemble the doona cover by sewing it together. Iron the fabric pieces and set them aside. Place the strips of fabric in the centre and pin them together, ensuring the panels are lined up correctly by matching the seams on both sides. This step will create the desired shape for your doona cover.
It is recommended to use soft cotton or a cotton blend for the fabric. Flannel is another good option as it comes in beautiful colours and can help avoid a high price tag. Don't forget to wash your fabrics before using them to make the doona cover.
Ben & Jerry's: Australian-Made or Imported?
You may want to see also
Explore related products
Sewing the sheets together
Firstly, cut your sheets. Cut the centre panel at 91 inches long and two panels that are 17 inches wide. Cut the straight side panels by folding the selvage edge towards the centre, then cut the fabric along the folded edge. Use a straight cut, leaving a 6-inch seam allowance. Next, measure and add 2 inches to allow for the overlap of the button band.
After cutting, assemble the duvet cover by sewing it up. Iron the fabric pieces and set them aside. Place the strips of fabric in the centre and pin them together, ensuring the panels are lined up correctly by matching the seams on both sides. This step will create the quilt cover with the desired shape.
Now, sew the two pieces together by overlapping them. Use a zipper foot to sew the tape down. Sew the edges of the front and back pieces. After sewing, fold them in half and use a French seam to enclose the raw edges.
Finally, turn the duvet cover and iron it. You can now add a hem or pocket on the left side of the quilt cover to finish the job. Stitch the sides of the quilt cover and the bottom to the duvet. You can use a plain sheet as the bottom layer instead of a zipper.
Finding a Home in Australia: A Guide
You may want to see also
Explore related products
Using the rolling method
The rolling method is a popular technique for putting on a doona cover, favoured for its ease and convenience. Here is a step-by-step guide on how to use the rolling method to put on a doona cover:
Firstly, lay your doona cover flat on your bed or another surface with the opening at the foot of the bed. Turn the cover inside out, ensuring the opening is accessible. Place your doona on top of the cover, with the closed end of the doona at the top, opposite the opening.
Next, tightly roll the doona and cover together, starting from the closed end. Roll it like a burrito or a sushi roll towards the bottom of the bed. Once you reach the end, wrap the duvet cover opening around the ends of the doona, turning the cover right side out. If your doona has buttons or clips, fasten the insert to the cover to secure it in place.
Now, gently unroll the whole thing. As you unroll, straighten the doona inside the cover so that it is evenly distributed. Finally, give the doona a gentle shake to smooth out any wrinkles, and close the cover using buttons, zips, or ties.
The rolling method is a quick and efficient way to put on a doona cover, eliminating the need for lifting, shaking, and flipping. It ensures a clean and tidy process, as nothing touches the floor, and it helps you achieve a perfectly covered doona.
Australian Women: Embrace, Don't Change Their Cover
You may want to see also
Explore related products
Using the take the corners and flip method
To make a doona cover in Australia, you will need to cut and sew pre-made flat sheets. Here is a step-by-step guide on how to make a doona cover using the "take the corners and flip" method:
Step 1: Prepare the Sheets
Wash and iron your chosen fabric sheets. Using soft cotton or a cotton blend is recommended, but flannel is also a good choice as it comes in beautiful colours and can help you avoid a high price tag.
Step 2: Cut the Sheets
Cut the sheets according to your desired measurements. For a standard quilt cover, cut the centre panel at 91 inches long and two panels that are 17 inches wide. Cut the straight side panels by folding the selvage edge towards the centre, then cut the fabric along the folded edge.
Step 3: Pin and Sew
After cutting the side panels, assemble the duvet cover by sewing the pieces together. Iron the fabric pieces and pin them together, ensuring the panels are lined up correctly by matching the seams on both sides. Sew the front and back pieces, right sides up, and place snaps or buttons in the right positions. Sew the two pieces together by overlapping them, and use a zipper foot to sew the tape down.
Step 4: Finish the Edges
Fold the edges of the duvet so that they fit perfectly, and sew the right sides together with a 1/2-inch seam allowance. Add a hem or pocket on the left side of the quilt cover for a finished look. Stitch the sides and bottom of the quilt cover, and enclose the raw edges using a French seam.
Step 5: Putting on the Cover
Now that you have made your doona cover, you can use the "take the corners and flip" method to put it on your doona. Lay your doona cover flat on the bed with the opening at the foot of the bed. Feed the left corner of your doona into the matching corner of the cover, and repeat on the bottom corner. Repeat this process on the other side, then pick up the top corners, give it a shake, and you're done!
Exploring Israel's Aussie Alternative: A Historical 'What If?
You may want to see also
Explore related products
Making a patchwork doona cover
Planning and Preparation:
Firstly, decide on the fabric and pattern for your patchwork. Soft cotton or cotton blends are good choices, and you can also use flannel, which comes in beautiful colours and is a more affordable option. If you want to use vintage sheets or thrifted fabric, ensure you have enough material for your desired pattern. Wash and iron your fabrics before starting, and if you're a beginner, consider using a simple pattern like a triangle or chevron design.
Cutting the Fabric:
Before cutting, make sure you have the correct measurements for your desired doona cover size. Cut the centre panel at 91 inches long and two panels that are 17 inches wide. Cut the straight side panels by folding the selvage edge towards the centre and then cutting along the folded edge. You can adjust the measurements to make a larger doona cover or create a quilt instead.
Sewing the Patches:
Using a straight stitch and a straight edge, sew the patches together one by one. You can use a sewing machine or hand stitch, depending on your preference and skill level. If you're hand sewing, consider using a three-step zig-zag stitch to reinforce the seams and keep them flat. Once you've sewn all the patches, you can arrange them into your desired pattern.
Assembling the Doona Cover:
After you've created your patchwork top, you can assemble the doona cover. Sew the right sides of the fabric together, leaving a 1/2 inch seam allowance. Add a hem or pocket on one side of the doona cover to prevent the doona from slipping out. Then, sew the sides and bottom of the cover, enclosing the raw edges with a French seam.
Finishing Touches:
To finish your doona cover, you can add fasteners like buttons or ties. Consider sewing a bias trim around the edges for added durability, especially if your measurements were slightly off. Finally, iron your doona cover to give it a neat and polished look.
Creating a patchwork doona cover is a rewarding project that allows you to express your creativity and add a unique touch to your bedding. Enjoy the process, and don't be afraid to experiment with different fabrics and patterns.
Harry Styles' Love on Tour: Will Australia Be Lucky?
You may want to see also
Frequently asked questions
You can use soft cotton or a cotton blend to make a doona cover. Flannel is another good option as it comes in beautiful colours and helps you avoid a high price tag.
The first step is to cut the sheet with a straight cut, leaving a 6-inch seam allowance. Then, measure and add 2 inches to allow for the overlap of the button band.
After cutting the side panels, iron the fabric pieces and set them aside. Place the strips of fabric in the centre and pin them together, ensuring the panels are lined up correctly by matching the seams on both sides. Sew the front and back pieces together, and then use a zipper foot to sew the tape down.
![Stroller Replacement Canopy Cover - Fit for Doona Car Seat- [Green, Black, Light Gray, Khaki, Pink] - Protection Shield, Textile Sun Shade, Doona Accessories](https://m.media-amazon.com/images/I/511696jPvBL._AC_UL320_.jpg)
