Lexi Webster
When making an international call to or from Australia, it is important to follow the correct dialing procedure to ensure the call is successful. To convert an Australian phone number to an international number, you must first understand the Australian number format for both landlines and mobile phones. This includes the country code, area code, and subscriber number. By following the correct dialing sequence, you can successfully place international calls to and from Australia.
| Characteristics | Values |
|---|---|
| Country code | +61 |
| Australian dial out code | 0011 |
| Australian dial in code | 61 |
| Mobile number prefix | 04 |
| International access code (US) | 011 |
| Area code for Brisbane | 07 |
| Area code for Perth | 08 |
| Country code for the UK | 44 |
Explore related products
What You'll Learn
Drop the first '0' of the area code
When converting an Australian phone number to an international format, it is important to drop the first zero of the area code. This is because the country code for Australia, +61, replaces the initial zero for an Australian international mobile format.
For example, if you are in Australia and want to write your phone number in international format, you would write the dial-in code (+61) followed by your phone number, including the area code minus the first zero. So, if your phone number in Sydney is (02) 1234 5678, then your international phone number in Australia is written like this: +61 2 1234 5678.
Similarly, if you want to call a mobile number in Melbourne from within Australia, you would dial 04XX XXX XXX. However, if you want to call the same number from outside Australia (for example, from the US), you would dial +61 4 XXXX XXXX.
The same rule applies when calling a landline number in Australia from within the country versus outside. For instance, if you want to call a landline number in Melbourne from within Australia, you would dial (03) XXXX XXXX. On the other hand, if you are calling the same number from outside Australia, you would dial +61 3 XXXX XXXX, dropping the first zero of the area code.
Therefore, when converting Australian phone numbers to international format, it is essential to remember to drop the first zero of the area code and replace it with the country code, +61.
Exide Batteries: Australian-Made or Not?
You may want to see also
Explore related products
Dial the Australian country code: '61'
When making an international call to Australia, you must dial the Australian country code followed by the recipient's 10-digit phone number. The country code for Australia is '61'.
To dial an Australian number from overseas, you will need to follow a specific format. First, dial your home country's international access code to indicate an international call. For example, the code for the US is '011'. After that, dial the Australian country code, '61'. Then, dial the area code without the first '0'. For instance, Brisbane's area code is '07', so you would dial '7'. Finally, dial the subscriber's landline or mobile number. For example, if you are calling the Brisbane number 07 4567 9812, the final format would be: '011 61 7 4567 9812'.
If you are dialling from a mobile phone, you can also use the '+' symbol instead of your country's exit code. So, the number above could be written as '+61 7 4567 9812'. This format is known as the 'international format' and is used to represent international phone numbers.
It is important to note that when dialling an Australian number from overseas, you should drop the first '0' of the area code. For example, if a number in Sydney is listed as (02) 1234 5678, the international phone number would be '61 2 1234 5678'.
By following these steps and dialling the Australian country code '61', you can successfully place international calls to Australian phone numbers.
Development Face-off: India vs. Australia
You may want to see also
Explore related products
Use the Australian exit code: '0011'
To convert an Australian phone number to an international phone number, you need to use the Australian exit code: 0011. This is the code that will enable you to make an international call from Australia.
The Australian exit code is the first step in the process of dialling an international number from an Australian phone. It is the code that allows you to exit Australia's phone system and access the international network. This code is standard for all international calls originating from Australia, regardless of the destination country.
The exit code is always followed by the country code of the country you are calling. For example, if you are calling the UK, the country code is 44. So, to call a UK number from Australia, you would first dial 0011, followed by 44, and then the rest of the subscriber's number.
It is important to note that when dialling an international number from Australia, you drop the first '0' of the area code. So, for example, if you are calling a UK number 01234 567891, you would dial 0011 44 1234 567891 from Australia.
On mobile phones, you can also use the '+' symbol instead of the exit code. So, the above number could be dialled as +44 1234 567891. This '+' symbol is often used to denote the start of an international phone number and is recognised by mobile phones as the international prefix.
Japan-Australia Shipping: What's the Deal?
You may want to see also
Explore related products
Use the international prefix: '+'
When writing Australian phone numbers for use outside of Australia, it is important to use the international format. This format uses a plus symbol ('+') to represent the
The country code for Australia is '61'. So, to convert an Australian phone number to an international number, you would start by adding a plus symbol ('+') and then the country code
The plus symbol ('+') is used to denote the start of a number in international format, also known as E.164. This format is recognised globally and can be used to make calls from various platforms, such as Microsoft Teams, Skype for Business, or a mobile phone.
When dialling an Australian phone number from another country, you will need to follow a specific dialling procedure. First, dial your home country's international access code, such as ''011' for the US. Then, dial the Australian country code, '61'. Next, dial the area code without the initial '0'. For example, if you are calling Brisbane, where the area code is '07', you would dial '7'. Finally, dial the subscriber's landline or mobile number. So, to call the Brisbane number '07 4567 9812' from the US, you would dial '011 61 7 4567 9812'.
The Gold Rush: Australia's Historic Transformation
You may want to see also
Explore related products
Format for landline and mobile numbers
When formatting Australian phone numbers for use outside the country, the international format should be used. This format uses a plus symbol ('+') followed by the country code ('61' for Australia).
For landline numbers, the international format is as follows: '+61', followed by the 2-digit area code, and then the rest of the number split into two chunks of four digits. For example, a landline number in Sydney might be written as '+61 2 1234 5678'.
Mobile numbers in Australia follow a standard format, starting with ''04' followed by eight digits. When writing mobile numbers in international format, the '+' symbol and country code are followed by the '04' and then the remaining digits split into two chunks of three. For example, an Australian mobile number could be written in international format as '+61 4 123 456 789'.
It is important to note that the Australian country code '+61' does not replace the '04' in the phone number. The '+' symbol is used to represent the international prefix and is often used in place of the Australian exit code (0011) when dialling from a mobile phone.
Amazon Book Shipping to Australia: What You Need to Know
You may want to see also
Frequently asked questions
To convert an Australian landline number to an international number, start by dialling your home country's international access code. Then, dial the Australian country code, "61". After that, dial the area code without the initial "0". Finally, dial the subscriber's landline number. For example, if the Australian landline number is (02) 1234 5678, the international number would be +61 2 1234 5678.
The international country code for Australia is +61. This country code is essential for making international calls to Australia.
To convert an Australian mobile number to an international number, you can follow a similar process as for landline numbers. First, dial your home country's international access code. Then, dial the Australian country code ("61") followed by the mobile prefix ("04"). Finally, dial the rest of the subscriber's mobile number. For example, if the Australian mobile number is 04 123 456 789, the international number would be +61 4 123 456 789.
