Clean Your Brunswick Bowling Shoes Like A Pro

Brunswick bowling shoes can be cleaned and maintained in a number of ways. Brunswick itself offers a rental shoe cleaner, which is specifically formulated to clean bowling rental shoes. This product is available in a 15 oz can, which can clean approximately 300 pairs of shoes. Alternatively, a disinfectant spray or gel can be used to clean bowling shoes, which helps to prevent the spread of germs and bacteria. This can be done by either spraying or wiping down the shoes with disinfectant. It is also important to wear socks with bowling shoes, as this helps to minimise bacteria and keep the shoes clean. In terms of general care, it is recommended to only wear bowling shoes while bowling, and to store them in a shoe bag to protect them from the elements. When cleaning bowling shoes, it is important to avoid the slide soles, as these can be sensitive to certain cleaning products.

Use a disinfectant spray or gel

Using a disinfectant spray or gel is an effective way to clean your Brunswick bowling shoes and prevent the spread of bacteria and germs. This is especially important if you are renting shoes from a bowling alley or using a shared pair, as they are used by multiple people. Disinfecting your shoes regularly will help keep them clean, minimise odours, and prolong their life.

There are several disinfectant products available that are suitable for bowling shoes. These include Lysol Disinfectant Spray, Clorox Disinfectant Spray, and Purell Disinfectant Spray. One option is to use Brunswick's Rental Shoe Cleaner, which is specifically formulated to clean bowling rental shoes and leaves a clean, fresh scent. This product is available in a 15 oz can, which is enough to clean approximately 300 pairs of shoes. Alternatively, you could use a disinfectant spray such as Medaphene Plus, which is available as a single can or in a 12-pack.

When using a disinfectant spray or gel, follow the instructions on the product label for correct usage. Typically, disinfectant sprays or gels are applied to the shoes before or after each use. It is a good idea to test the product on a small area of the shoe first, especially if your shoes are made of suede or coloured leather, as some disinfectants may cause discolouration. Always wear socks with your bowling shoes to minimise bacteria and help keep them clean.

In addition to using a disinfectant, there are other ways to care for your Brunswick bowling shoes. It is recommended to store them in a shoe bag to protect them from the elements and keep them in good condition. You should also avoid wearing them outside or walking around the bowling centre, as this can cause unnecessary wear and tear. To clean the soles of your shoes, use a wet rag to remove grime and then wipe them dry. For felt slide soles, use a wire brush to keep them clean and performing optimally.

Clean with a damp cloth

To clean your Brunswick bowling shoes with a damp cloth, start by filling a bowl with lukewarm water. Take a clean, soft cloth and dip it into the water, then wring it out so that it is damp but not soaking wet. It is important to avoid getting the slide soles of your bowling shoes wet, as this can affect your performance. Therefore, be careful to only clean the cloth-covered or leather parts of the shoe.

Use gentle circular motions to wipe down the exterior of the shoe, removing any dirt or grime. If there are any scuffs on the shoe, you can use a Magic Eraser to remove them. However, be cautious when using this product, as it may remove the colour from the shoes. It is a good idea to test it on a small, inconspicuous area first.

If your shoes are particularly dirty, you may need to repeat the process, changing the water if it becomes too dirty. Once you have finished cleaning the shoes, leave them to air-dry in a dark, dry room. Do not leave them in direct sunlight or put them in a tumble dryer, as this can damage the shoes.

If your shoes have rubber soles, you can clean them with a wet rag, removing as much grime as possible, and then wipe them dry. For felt soles, use a wire brush to keep them clean and performing optimally.

Use a shoe brush

Using a shoe brush is an important part of maintaining your bowling shoes. The soles of your bowling shoes are crucial for achieving a clean and consistent slide, so they need to be kept clean.

For the rubber soles of your bowling shoes, use a regular shoe brush to clean them. You can also use a wet rag to remove any grime and then wipe them dry. This will help keep the soles free from dirt and debris, which can affect your performance.

If your bowling shoes have felt soles, use a wire brush to keep them clean and performing optimally. The felt on the slide sole allows for a smooth slide, so it's important to keep it well-maintained.

In addition to using a shoe brush, you can also use a scotch-brite pad to "sand" the soles and remove any shiny marks and debris. This will help restore the soles to their original condition and improve your sliding performance.

It's also important to note that you should avoid using alcohol on the soles of your bowling shoes, as it can dry them out and affect your sliding ability. Instead, a Magic Eraser can be used to clean the rubber bottom of the shoe without causing any damage.

By regularly using a shoe brush and other recommended cleaning tools, you can effectively maintain the soles of your bowling shoes and ensure optimal performance during your games.

Store in a shoe bag

To ensure the longevity of your bowling shoes, it is important to store them in a shoe bag. Shoe bags keep your bowling shoes protected from the elements and help them last longer. It is also a good idea to bring a pair of sandals or shoe covers to change into if you need to leave the bowling area or go outside. This will help keep your bowling shoes clean and free of dirt and bacteria.

When you get home, remove your bowling shoes from your bag and give them a quick clean if necessary. Use a damp cloth to wipe down the shoes, avoiding the slide soles, and leave them to dry in a dark, dry room. You can also use a deodorizing foot powder or spray to keep your shoes smelling fresh.

If your shoes have interchangeable soles, it's a good idea to keep a few different options on hand to match the approach you're bowling on. If your soles are not interchangeable, you can use slip-on shoe sliders, shoe brushes, or powders to adjust your slide.

After bowling, you can clean the rubber traction sole and brake heel with a wet rag, removing any grime, and then wipe them dry. For the felt slide soles, use a wire brush to keep them clean and performing optimally.

Proper care of your bowling shoes will help them last longer and perform better. By storing them in a shoe bag, keeping them clean, and maintaining the soles, you can ensure that your bowling shoes are in great shape for years to come.

Use a deodorising spray

If your Brunswick bowling shoes are starting to smell, it's time to use a deodorising spray. You can use either a dedicated shoe deodorising spray or a foot deodorising spray. One such product is the Brunswick Sanispray Shoe Deodorizer, which is specifically formulated to clean bowling rental shoes and leave them with a clean, fresh scent. One 15 oz can of this product can clean approximately 300 pairs of shoes.

If you don't have access to a shoe deodorising spray, you can also use your favourite deodorising foot spray. You can also use a deodorising foot powder if you prefer. These products will help to neutralise any unpleasant odours and leave your shoes smelling fresh.

It's important to note that while disinfectant sprays can also help to eliminate odours, they are not the same as deodorising sprays. Disinfectants are designed to kill bacteria and germs, and while they can help to prevent the spread of illness-causing germs, they may not effectively eliminate odour-causing bacteria. Therefore, if odour is your main concern, it's best to opt for a deodorising spray specifically.

In addition to using a deodorising spray, there are several other steps you can take to keep your Brunswick bowling shoes clean and odour-free. Firstly, always wear socks with your bowling shoes to minimise bacteria and absorb moisture. Additionally, try to avoid wearing your bowling shoes around the bowling centre; only wear them while bowling or waiting to bowl. If you need to leave the pit or go outside, bring a pair of sandals or shoe covers to change into. This will help to keep your bowling shoes clean and reduce the amount of dirt and bacteria they are exposed to.

Frequently asked questions