Omari Gates
The Blue Wave Belize above-ground pool is a great option for those seeking a high-quality, affordable swimming pool. It comes in a range of shapes and sizes, including round and oval, and depths of 48 or 52 inches. The pool is constructed with solid steel walls and steel parts that are hot-dip galvanised with zinc and aluminium for corrosion protection. It also features resin top caps embedded with UV inhibitors for maximum longevity. The pool is easy to install, with comprehensive instructions included, and comes with a 15-year limited warranty.
What You'll Learn
Installation instructions
The Blue Wave Belize above-ground pool is designed to be easy to install and comes with comprehensive step-by-step instructions. Here is a detailed breakdown of the installation process:
Prepare the Ground
Clear the installation area and ensure the ground is completely flat. Any unevenness can cause pressure points within the pool frame, potentially damaging it. Consider laying bricks or stepping stones under the pool for added stability and to prevent the pool from settling over time.
Build the Walls
For this step, it is best to have one person inside the pool area and another outside. Insert the steel wall into the bottom rail. When you have gone around the diameter of the pool, use bolts, washers, and nuts to hold the two ends of the wall together.
Install the Skimmer and Liner
Follow the instructions provided with your pool to install the skimmer and liner.
Install the Top Rail and Upper Joint
Again, follow the provided instructions to install the top rail and upper joint.
Fill the Pool
After completing the previous steps, you can start filling your pool with water. Check frequently to ensure that everything stays in place as the pool fills.
Install the Ladder
Place the A-frame entry ladder in your desired location, following the safety instructions provided.
The Blue Wave Belize pool is designed to be a permanent, one-time installation, providing year-round fun for you and your family. While some site preparation is required, the pool's components are lightweight and easy to assemble. The comprehensive instruction manual will guide you through the entire installation process, ensuring a stress-free experience.
Belize's Sittee River: Where's It Flowing?
You may want to see also
Preparing the ground
The first step in installing your Belize pool is to prepare the ground where you plan to place it. It is crucial that the ground under your pool is completely flat to avoid any pressure points that may damage the pool frame. Start by clearing the area and levelling the ground as much as possible. Some people recommend laying bricks or stepping stones under the pool to prevent it from settling over time.
Before you begin, it is recommended to refer to the comprehensive installation manual that comes with your pool. This manual will provide detailed instructions on preparing the site and a list of all the tools you will need. It is also advisable to have help during the installation process, as certain steps will require one person to be inside the pool and another outside.
Once the ground is prepared, you can begin building the walls. Insert the wall into the bottom rail, and when you reach the diameter of the pool, use bolts, washers, and nuts to secure the two ends together. It is important to ensure that the walls are sturdy and properly aligned to avoid any issues later on.
Belize and Cancun: Neighbors or Distant Cousins?
You may want to see also
Building the walls
Once the ground is prepared, it's time to build the walls. Insert the wall into the bottom rail. When you have gone the diameter of the pool, use bolts, washers, and nuts to hold the two ends together. The wall is made of steel and features multiple layers of protection to resist rusting and corrosion. It is lightweight, making it easy to install.
After the wall is in place, you can install the skimmer and liner, followed by the top rail and upper joint. Be sure to refer to the installation manual for detailed instructions and troubleshooting tips.
Belize: Paradise Lost?
You may want to see also
Installing the skimmer and liner
Prepare the Components:
Before you begin, gather all the necessary parts: the skimmer, wall gasket, faceplate, and screws. The gasket is essential to prevent leaks, so ensure it's in good condition.
Fill the Pool:
Continue filling the pool with water until the water level is approximately 4 inches from the bottom of the rectangular skimmer hole at the top of the wall. This step is crucial to support the weight of the skimmer and prevent buckling the wall.
Position the Gasket and Skimmer:
Place the wall gasket around the skimmer hole. It should have a double layer, with one layer inside the wall (between the wall and the liner) and the other layer on the outside. Now, hold the skimmer on the outside of the wall, positioning it over the hole.
Secure the Faceplate:
Get an assistant to place the faceplate on the inside of the wall, lining it up with the hole. Use a hand screwdriver to poke a screw into one of the corner holes of the faceplate, carefully penetrating the liner, gasket, screw hole, and finally, the skimmer. Repeat this process for the remaining three corners, ensuring a tight fit.
Mount the Skimmer:
Complete the mounting process by screwing in all the inner screws around the faceplate. Again, use a hand screwdriver to avoid over-tightening and ensure a snug fit.
Cut the Liner:
After the skimmer is mounted, carefully cut a small "X" in the liner inside the faceplate. Work this cutout towards the inside edge of the faceplate, removing the section of the liner inside. Be extremely cautious not to cut the gasket.
Connect the Skimmer:
Finally, connect the skimmer to your pool pump using the flexible hose provided with the pump. This completes the installation of the skimmer.
Remember to refer to the Belize pool's installation manual for additional instructions and illustrations that may be specific to your pool model.
Hopkins Belize: An Angler's Paradise
You may want to see also
Filling the pool
It is important to check the pool often as you fill it to make sure that everything stays in place and no adjustments are needed. After filling the pool, you can put your Blue Wave pool steps in place and enjoy your new pool!
The Blue Wave Belize above-ground pool is a great choice for those seeking a solid swimming pool. It is easy to install and comes with a comprehensive installation manual. The pool is designed to be a permanent installation, providing year-round fun for the whole family.
Is Consejo, Belize Safe for Tourists and Expats?
You may want to see also
Frequently asked questions
The package includes the pump and sand filter system, a liner, an A-frame entry ladder, a wide-mouth skimmer, detailed instructions, the steel outer walls, as well as the metal rails and supports.
The ground under your pool needs to be completely flat. Clear the area and level the ground as much as possible, then lay bricks or stepping stones under where the pool will sit so you do not have to worry about the pool settling over time.
The pool has a solid steel wall and its steel parts are hot-dip galvanised with a combination of zinc and aluminium for ultimate protection against corrosion. Resin top caps are embedded with UV inhibitors for maximum longevity.
The Blue Wave Belize pool is designed to be easy to install and comes with a comprehensive installation manual. It is recommended that you have help from at least one other person.
